The Monku Retro 3 is a custom built and prepared ODROID-XU4™ device. Expertly constructed and configured to run Lakka
with the proper BIOS configurations for all emulators. Configured to run the latest Lakka build for the ODROID-XU4 device with support
for...
Atari 2600, Atari 5200, Atari 7800, Atari Jaguar, Atari Lynx,
ColecoVision, Commodore 64, DosBox, ScummVM, Intellivision,
Magnovox-Odyssey2,
MAME,
MSX-1, MSX-2,
NES,
GameBoy, GameBoy Advance, GameBoy Color, Virtual Boy, SNES, N64,
WonderSwan, WonderSwan Color, NEO GEO Pocket, NEO GEO Pocket Color,
Sega SG-1000, Sega Mark 3, Sega Master System, Sega Genesis, Sega GameGear, Sega DreamCast
Sinclair ZX Spectrum,
NEC Turbo Grafx 16, NEC Super Grafx,
PSP, and PS1
emulators.
How to Use Your Game Console:
- With the gamepad use the D-PAD to navigate the game mode and A, B buttons for selection.
- With the gamepad use L1 + Select + Start + R1, Select and Start are the top set of inner small black buttons on the gamepad, to bring up the sub menu to exit games currently being played.
Special Notes:
- Username and password for the SSH login is root, root. You must enable the SSH service via the retroarch menu first.
- Be sure to make a backup of your SD cards in case they fail!!
- Some emulators require keyboard input.
Details:
- Expertly Assembled and Prepared ODROID-XU4 (With Colored Decal)
- Lakka OS boots directly into retroarch for the best gaming console experience.
- 64GB class 10 SD card with prepped BIOS files.
- Support for
Atari 2600, Atari 5200, Atari 7800, Atari Jaguar, Atari Lynx,
ColecoVision, Commodore 64, DosBox, ScummVM, Intellivision,
Magnovox-Odyssey2,
MAME,
MSX-1, MSX-2,
NES,
GameBoy, GameBoy Advance, GameBoy Color, Virtual Boy, SNES, N64,
WonderSwan, WonderSwan Color, NEO GEO Pocket, NEO GEO Pocket Color,
Sega SG-1000, Sega Mark 3, Sega Master System, Sega Genesis, Sega GameGear, Sega DreamCast
Sinclair ZX Spectrum,
NEC Turbo Grafx 16, NEC Super Grafx,
PSP, and PS1
emulators out of the box.
- Configured for low memory usage.
- Controller is mapped and ready to use.
- Works great with GameSir G3S wireless controllers.
Hardware Specifications:
- Samsung Exynos5422 Cortex™-A15 2Ghz and Cortex™-A7 Octa core CPUs
- Mali-T628 MP6(OpenGL ES 3.1/2.0/1.1 and OpenCL 1.2 Full profile)
- 2Gbyte LPDDR3 RAM PoP stacked
- eMMC5.0 HS400 Flash Storage
- 2 x USB 3.0 Host, 1 x USB 2.0 Host
- Gigabit Ethernet port
- HDMI 1.4a for display
- H.265 4K/60FPS and H.264 4K/30FPS capable VPU
- Power: 5V/4A input
Recovering from a Crash:
- Lakka will reboot into the retroarch kiosk in the event of a crash.
- You can also reboot and shutdown the device from the retroarch menu.
- Holding down the power button on the top of the device will force a power cycle.
The Monku Retro 3 is a custom built and prepared ODROID-XU4™ device. Expertly constructed and configured to run Lakka with the proper BIOS configurations for all emulators. Configured to run the latest Lakka build for the ODROID-XU4 device with support for...
